Pulse repair machine for car with a maximum output current of 3800A is the ideal product for bulging and straightening small thickness car body parts. Bonnet, door, roof panelling, etc. The product is multifunctional and it has a complete solution.Thanks to its low power consumption, it can be connected to a simple 220V power supply. Small sweat stain: Our machine makes a small welding spot, which does not damage the corrosive paint on the other side of the panel. Efficient radiator: The cooling system can quickly achieve heat dissipation and make the machine burn hard. High efficiency during your work and fast heat dissipation is ensured.
2 welding guns - With 2 welding guns, this machine can perform two different functions, it means that the time and energy spent on switching weapons can be reduced and the efficiency of the work can be increased. Portable Handle - The design of 3800A Deltpuller is characterized by the compact body shape, combined with the comfortable handle. It is easy to move. So you can easily carry it to the place as you want.Specification: Phase Voltage: 110V 50-60/Hz Rate Power: 1.8KVA Input Current: 16A Work Mode : 6 Modes Available Power: 2 KW Power Level: Spot Welding / pulse spot welding Single Side Welding Thickness: 0.024 - 0.06 in / 0.6 - 1.5 mm Maximum Current:3800A Dimensions (L x W x H): 7.56 x 11.81 x 7.16 in / 19.2 x 30 x 18.2 cm Weight: 44 lbs / 20 kg. Ensure that the spot welder dent puller is connected to the ground wire and the grounded power cord is in good condition. Ensure that the workbench is connected to the grounding device. Make sure that the operator does not touch the metal parts to be welded without any protection. Do not work in a very wet place or on a wet floor. Electrodes, welding arms and other secondary conductors will reach a high temperature after the machine stops and maintain high temperature for a long time. Please pay attention to the risk of burns. Avoid contact with the welding part.
Do not weld with worn-out cables. Check that there is no default with the isolation with stripped cables or with loose connections. Unsafe factors such as loose connection and water cooling system leakage.
Turn off the welding machine and unplug the power plug directly before performing all inspections and maintenance. Switch off the unit before replacing the metal parts. Please protect your eyes and wear protection clothes when operate the machine. Please don't wear the ring, watch etc. In order to ensure the best performance of the spot welder, it is recommended to use the original set of grounding head and torch.
Please make sure it's correct. This will help your product to be received safely and quickly!Please return the item within 30 days after receiving if you are not happy with your purchasing. We have been engaged for many years in the line of automobile repair instruments and our corporation is established for the purpose of trustworthiness. We have 2 warehouses that are located in Germany and US. Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time).