3 IN 1 Multifunctional Welder. 15.0 inches x 24.0 inches x 12.0 inches. This product cannot be welded to aluminum and copper!!! (aluminum wire diameter 1.2mm)? It is the welding effect that can change according to the gestures and techniques you use.The MMA of other electric welding machines is mechanically controlled, and the welding effect is adjusted by your own manual control. If you are a beginner, you can select our preset usage mode on the control panel of the machine; if you are a proficient, you can fine-tune the parameters of the machine by turning the knob. And this Prostormer Welding Machine is suitable for Lift TIG, flux MIG, gas MIG and so on. MMA is the most basic function of electric welding machine. It works with electrode holder and earth clamp. It includes MIG (Metal Inert Gas welding) and MAG (Metal Active Gas Arc Welding) two functions. They all need to use welding wire with a diameter of 0.8mm and 3.0m MIG welding torch. In this function, you don't need to connect an external gas protection device, but you need to use flux cored welding wire. Prostormer TIG/MIG/ARC 3 in 1welding machine is an easy-to-use welder and designed to weld ferrous metals such as steel and iron.
This machine can perform MIG, TIG and ARC/MMA welding. So it is very suitable for basic welding and DIY work at home or in the workshop. MIG/TIG/MMA 3 in 1 Welder. You can operate the control panel of this machine very smoothly and simply. You can either choose the mode you want to use, or you can manually fine-tune the voltage and wire feeding speed of the machine.
And it also has a body overheating protection mechanism to prevent damage to the machine. Flux Core Welding (dont need gas). In Flux Core Welding, you don't need to connect an external gas protection device, but you need to use flux cored welding wire. Wire not feeding despite wire feed pulley turning. Dirty current nozzle (torch tip).
Wire feed pulley set too tight. Too low clamping pressure of the wire feed pulley.
Interrupted or disruptive wire supply. Cut on worn driving gear. Poor contact between earth clamp and part to be welded--Tighten the pliers, remove paint and rust. Short circuit between current nozzle and gas supply pipe--Clean or replace the current and gas nozzle, remove dirt, paint and rust. Too loose current nozzle--Tighten it firmly.Welder suddenly stops working after longer operation. Welder has overheated due to too long use and the thermal protection has activated. Let the welder cool down. We guarantee against any defective or misrepresented products. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders".
The seller is "be-stars" and is located in this country: US. This item can be shipped worldwide.