2000W Heat Jointer PVC Banner Welder Machine for Solvent/Water Printer. The product is designed for welding painting surface made up of heat-melted material, such as PVC and PE fabric.Known to all of the advertising painting industrials, referring to the way that bond disjunct advertising poster surfaces, we usually use the single-moment glue, such as 502 glue to join them together. But this method has a lot of. (1) Almost all of these kinds of bond are harmful chemical industrial products, which are more harmful on human health, and more likely to cause diseases, such as occupational diseases and cancer, etc. (2) When work, the operation is slow and is not too satisfied in strength with the glue.
(3) The air temperature may influence the stick strength. In low temperature environment, the bond effect may turn into badness. For these reasons, people need the solution of above problems, many factories and experts are all want to replace 502 glue with a new positive method. New product of the Poster Welder Without Glue(We normal call it Heat-Jointer), will be a more efficient companion for advertising material instead of the glue.It can nicely solve the above existent problems, and may save more manpower and work field, for example, a PVC jointed painting with 200 meters long surface can be easily coalesced together and well matched. All the works can be well finished by a single person only with a heat-resistant and smooth base ground about 50 square meters. The machine is designed according to the hot-breeze theory, where the adoption is from self-move and heat-treated principle. So it can well weld heat-melted materials, such as outdoor advertising poster, PVC & PE fabric canvas and sailcloth, etc.
It is assembled with many nice and wearable hardwares. It is constructed simply, and also easy to maintain.The operation is simple and its price is reasonable. So many advantages will make it a good choose! Each time when getting in touch with it, many industrial technician may have a thick and thick interest.
It is widely used for PVC fabric, PE canvas, indoor & outdoor poster banner, advertisement for booth and plastic surface sailcloth, etc. Heat dissipation system is set on the back of the machine, for avoiding cooling fan from getting burnt under the intense heat. Air outlet is double than the size of the original version, offering much quicker heating and more effective heating discharge. New design, noise from working fan is significantly reduced.
Faster, quicker and more environmental friendly. A new designed main board for the welder, more stable and reliable. Digital display, adjustable temperature, moving speed & hot air blowing rate. The temperature, speed and blowing rate can be adjusted more accurate. The"Red"designed power button, it can switch on/off the machine easily and safely.
With the designed fan system and blowing gate, the temperature will be more stable. Auto stand-by if no operation within 15 mins. The speed of this joint welder should be set above 7.After the welding is finished, please let the machine cool down before turn off the power; otherwise the fuse will be burned. Voltage: 110V 60Hz for USA/Mexico/Canada; 220V for European countries and other countries. Adjustable Self-Move Speed: 0.8-15m/min. Package Size: 48x36x34cm(18.9x14.2x13.4in). 1 x Jointer Welding Machine.