Small Handheld Laser Spot Welder Laser Welding Machine 30A 50A 80A 220V/110V

Applicable for fast welding of platinum, gold, silver and steel. Used high frequency discharge plasma.

Adjust output power according to different size of wire. Cannot put foot on switch for long time, in case of burn internal circuit. Please caution the flash while using, it's bad for eyes. Maintenance must be professional worker, high voltage is dangerous. Power: 220V or 110V 50 / 60HZ. Welding range: 0.6mm-1.2mm. Maximum current up to: 50A.

Handheld welding gun X 1PC. Maximum current up to: 80A. Electrode clamping output negative electrode, the electrode seat output positive pole. Tungsten needle can be sharpened in the.

Grinding machine, the use of cutting-edge discharge principle. 3 tungsten needle diameter 1.5mm.

Turn on the power and turn on the power switch. Adjust the power knob, divided into coarse and fine. According to the work requirements can be adjusted scale.

The workpiece is aligned with the tweezers. The workpiece interface is aligned with the tungsten needle (the optimum distance is 5mm). With the foot pedal switch (remove the foot). Feet can not be a long time stepping on the foot switch, step on immediately remove, such as a long time stepping on the switch, the machine is in a short circuit state, will burn the internal circuit. Please use this machine for precision.

Flash on the eyes of injury, please use the protective measures. 4 When you press the foot switch, do not touch the metal parts of the tungsten needle and tweezers at the same time, otherwise there will be a sense of acupuncture.

---